M45x1.5mm Fixed Gas Detector In Pipe Gallery Remote Control + Four-Button Operation Wall Mounted Pipe Type

SKU: EP-JQB-G

M45x1.5mm Fixed Gas Detector: Remote control pipe gallery model with four-button wall mounted design. Ideal for pipe-type gas detection. Enhance safety with accurate and reliable gas monitoring.

Get a Quotation

Description
Technical Data

Product Introduction

Gas transmitters consist of an enclosure, sensor, and electronics that convert a signal from a gas sensor into an analog output signal. Electrical outputs for gas transmitters include analog current, analog voltage, and frequency. Analog current levels such as 4 – 20 mA are suitable for sending signals over long distances. Typically, a current is imposed on the output circuit proportional to the measurement. Feedback is used to provide the appropriate current regardless of line noise and impedance. Analog voltage outputs are simple, usually linear functions of the measurement. Frequency or modulated frequency outputs for gas transmitters include amplitude modulation (AM), frequency modulation (FM), sine waves, and pulse trains.

Product Detail

Detection Method	Diffusion type, flow type, pipeline type
Resolution	O₂:0.1%Vol EX:1%LEL CO:1ppm H₂S:1ppm
Accuracy	≤±3%
Repeatability	≤±1%
Zero Drift	≤±1% (F.S/year)
Response Time	≤20 seconds (T90) T90 depends on sensor characteristics
Recovery Time	≤20 seconds (T90-T10 depends on sensor characteristics)
Explosion-proof Signs	Exd II CT6 Gb(-40℃～60℃)
Output Form	220VAC 0.5A or 5VDC 0.5A
The Main Material	316 stainless steel, ADC12 aluminum alloy
Installation Method	pipeline type, Wall-mounted type
Working Humidity	≤95%RH no condensation, humidity >90%RH condensation can be equipped with a filter
Relative Humidity	10%～95%RH
Visible Distance	≥10 meters (5.0 vision)
Direct Reading	alarm value, Measured value
Operation Method	Remote control + four-button operation
Operating Mode	administrator mode, user mode
Calibration	Target point calibration function
Power Supply	12-35VDC
Power Consumption	conductivity sensor: P≤2.9W, Electrochemical sensor: P≤1.5W, Infrared sensor: P≤3.0W, Low power consumption catalytic, Ordinary catalytic sensor: P≤2.8W, PID sensor: P≤2.8W, sensor: P≤1.5W, Thermal
Work Pressure	0.02MPa～0.36MPa (zirconia principle oxygen sensor), 0.08MPa～0.6MPa (thermal conductivity principle sensor), 86KPa～106KPa (others)
Alarm Mode	Panel LED alarm
Alarm Point Setting	can be set by yourself
Protective Function	automatic sensor protection, intermittent detection, Lightning protection, surge protection, wiring fault-tolerant
Audible Alarm	Optional sound and light alarm: alarm sound > 90 decibels
Size	180mm140mm92mm (heightwidththickness)
Weight	About 1.6Kg
Implementation Standards	GB15322.1-2003
Certified Product	GB3836.1-2010
Standard Accessories	GB3836.2-2010
Quality Assurance	GB3836.4-2010
Protection Level	SIL certification (SIL SIL3); ISO9001
Detection Method	Diffusion type, flow type, pipeline type	Resolution	O₂:0.1%Vol EX:1%LEL CO:1ppm H₂S:1ppm
Accuracy	≤±3%	Repeatability	≤±1%
Zero Drift	≤±1% (F.S/year)	Response Time	≤20 seconds (T90) T90 depends on sensor characteristics
Recovery Time	≤20 seconds (T90-T10 depends on sensor characteristics)	Explosion-proof Signs	Exd II CT6 Gb(-40℃～60℃)
Output Form	220VAC 0.5A or 5VDC 0.5A	The Main Material	316 stainless steel, ADC12 aluminum alloy
Installation Method	pipeline type, Wall-mounted type	Working Humidity	≤95%RH no condensation, humidity >90%RH condensation can be equipped with a filter
Relative Humidity	10%～95%RH	Visible Distance	≥10 meters (5.0 vision)
Direct Reading	alarm value, Measured value	Operation Method	Remote control + four-button operation
Operating Mode	administrator mode, user mode	Calibration	Target point calibration function
Power Supply	12-35VDC	Power Consumption	conductivity sensor: P≤2.9W, Electrochemical sensor: P≤1.5W, Infrared sensor: P≤3.0W, Low power consumption catalytic, Ordinary catalytic sensor: P≤2.8W, PID sensor: P≤2.8W, sensor: P≤1.5W, Thermal
Work Pressure	0.02MPa～0.36MPa (zirconia principle oxygen sensor), 0.08MPa～0.6MPa (thermal conductivity principle sensor), 86KPa～106KPa (others)	Alarm Mode	Panel LED alarm
Alarm Point Setting	can be set by yourself	Protective Function	automatic sensor protection, intermittent detection, Lightning protection, surge protection, wiring fault-tolerant
Audible Alarm	Optional sound and light alarm: alarm sound > 90 decibels	Size	180mm140mm92mm (heightwidththickness)
Weight	About 1.6Kg	Implementation Standards	GB15322.1-2003
Certified Product	GB3836.1-2010	Standard Accessories	GB3836.2-2010
Quality Assurance	GB3836.4-2010	Protection Level	SIL certification (SIL SIL3); ISO9001

Environmental

Operating Temperature	-20℃～50℃ (infrared/fluorescence gas sensor), -20℃～50℃ (pid principle sensor), -40℃～270℃ (special catalytic combustion), -40℃～50℃(electrochemistry), -40℃～70℃ (ordinary catalytic combustion principle sensor), -40℃～70℃ (thermal conductivity principle sensor), -40℃～750℃ (zirconia principle oxygen sensor)
Operating Temperature	-20℃～50℃ (infrared/fluorescence gas sensor), -20℃～50℃ (pid principle sensor), -40℃～270℃ (special catalytic combustion), -40℃～50℃(electrochemistry), -40℃～70℃ (ordinary catalytic combustion principle sensor), -40℃～70℃ (thermal conductivity principle sensor), -40℃～750℃ (zirconia principle oxygen sensor)

Detection Method	Diffusion type, flow type, pipeline type
Resolution	O₂:0.1%Vol EX:1%LEL CO:1ppm H₂S:1ppm
Accuracy	≤±3%
Repeatability	≤±1%
Zero Drift	≤±1% (F.S/year)
Response Time	≤20 seconds (T90) T90 depends on sensor characteristics
Recovery Time	≤20 seconds (T90-T10 depends on sensor characteristics)
Explosion-proof Signs	Exd II CT6 Gb(-40℃～60℃)
Output Form	220VAC 0.5A or 5VDC 0.5A
The Main Material	316 stainless steel, ADC12 aluminum alloy
Installation Method	pipeline type, Wall-mounted type
Operating Temperature	-20℃～50℃ (infrared/fluorescence gas sensor), -20℃～50℃ (pid principle sensor), -40℃～270℃ (special catalytic combustion), -40℃～50℃(electrochemistry), -40℃～70℃ (ordinary catalytic combustion principle sensor), -40℃～70℃ (thermal conductivity principle sensor), -40℃～750℃ (zirconia principle oxygen sensor)
Working Humidity	≤95%RH no condensation, humidity >90%RH condensation can be equipped with a filter
Relative Humidity	10%～95%RH
Visible Distance	≥10 meters (5.0 vision)
Direct Reading	alarm value, Measured value
Operation Method	Remote control + four-button operation
Operating Mode	administrator mode, user mode
Calibration	Target point calibration function
Power Supply	12-35VDC
Power Consumption	conductivity sensor: P≤2.9W, Electrochemical sensor: P≤1.5W, Infrared sensor: P≤3.0W, Low power consumption catalytic, Ordinary catalytic sensor: P≤2.8W, PID sensor: P≤2.8W, sensor: P≤1.5W, Thermal
Work Pressure	0.02MPa～0.36MPa (zirconia principle oxygen sensor), 0.08MPa～0.6MPa (thermal conductivity principle sensor), 86KPa～106KPa (others)
Alarm Mode	Panel LED alarm
Alarm Point Setting	can be set by yourself
Protective Function	automatic sensor protection, intermittent detection, Lightning protection, surge protection, wiring fault-tolerant
Audible Alarm	Optional sound and light alarm: alarm sound > 90 decibels
Size	180mm140mm92mm (heightwidththickness)
Weight	About 1.6Kg
Implementation Standards	GB15322.1-2003
Certified Product	GB3836.1-2010
Standard Accessories	GB3836.2-2010
Quality Assurance	GB3836.4-2010
Protection Level	SIL certification (SIL SIL3); ISO9001

M45x1.5mm Fixed Gas Detector In Pipe Gallery Remote Control + Four-Button Operation Wall Mounted Pipe Type

Product Introduction

Product Detail

Environmental

Products

Contact Info

M45x1.5mm Fixed Gas Detector In Pipe Gallery Remote Control + Four-Button Operation Wall Mounted Pipe Type

Inquiry Form for Bulk Order?

Product Introduction

Product Detail

Environmental

Related products

Products

Contact Info

Login